User`s manual
Chapter 4: BIOS
4-5
Auto to allow the BIOS to automatically congure the parameters of the SATA
device installed on a slot.
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be used
in multi-sector transfer. The default setting is Disabled.
LBA Mode Control
This item determines whether the Phoenix BIOS will access a IDE Device via
the LBA mode. The default setting is Disabled.
32 Bit I/O
This option allows the user to enable or disable the function of 32-bit data
transfer. The options are Enabled and Disabled.
Transfer Mode
This option allows the user to set the transfer mode. The default setting is
Standard.
Ultra DMA Mode
This option allows the user to congure the Ultra DMA Mode setting. The
default setting is Disabled.
Installed Memory
This display informs you how much total memory installed in the system is detected
by the BIOS.
System Memory
This display informs you how much system memory is available in the system.