User`s manual
Chapter 4: BIOS
4-7
skipping certain tests after the computer is turned on. The settings are Enabled
and Disabled. If Disabled, the POST routine will run at normal speed.
ACPI Mode
Select Yes to use the ACPI (Advanced Conguration and Power Interface)
power management feature on your system. The options are Yes and No.
Power Button Behavior
If set to Instant-Off, the system will power on or power off immediately as
soon as the user hits the power button. The options are Instant-Off and
4-Second Override.
Resume On Modem Ring
Select On to “wake your system up” when an incoming call is received by your
modem. The options are On and Off.
Resume On PME#
Select On to “wake your system up” from the PME# of PCI slots. The options
are On and Off.
PS2 Keyboard (KB)/Mouse Wake Up
Select Enable to “wake your system up” from the S1, S4 or S5 state. If this
feature is set to Enabled, you will also need to enable the JPWAKE jumper by
closing pins 1-2. (Please refer to Pg. 1-5 and Chapter 2 for more details). The
default setting is Disabled.
USB Wake Up
This setting allows you to wake up the system from S4 state. Make sure to set the
properjumperrstforUSBwakeup.TheoptionsareEnabledandDisabled.
Power Loss Control
This setting allows you to choose how the system will react when power
returns after an unexpected loss of power. The options are Stay Off, Power
On, and Last State.
Watch Dog
If enabled, this option will automatically reset the system if the system is not
active for more than 5 minutes. The options are Enabled and Disabled.
Summary Screen
This setting allows you to Enable or Disable the summary screen which displays
thesystemcongurationduringbootup.