User`s manual

4-4
X7SB4/X7SBE User's Manual
Serial ATA
This setting allows the user to enable or disable the function of Serial ATA. The
options are Disabled and Enabled.
Native Mode Operation
Select Serial ATA to use the SATA mode, or select Auto to use the Native
Mode for ATA. The options are: Serial ATA and Auto.
Serial ATA (SATA) RAID Enable
Select Enable to enable Serial ATA RAID Functions. (For the Windows OS
environment, use the RAID driver if this feature is set to Enabled. When this
item is set to Enabled, the item: ICH RAID Code Base will be available for you
toselecteitherIntelorAdaptecHostRAIDrmwaretobeactivated.Ifthisitem
is set to Disabled, the item-SATA AHCI Enable will be available.) The options
are Enabled and Disabled.
ICH RAID Code Base
SelectIntel toenable theIntel SATARAIDrmware.SelectAdaptectouse the
AdaptecHostRAIDrmware.TheoptionsareIntel and Adaptec.
SATA AHCI
Select Enable to enable the function of Serial ATA Advanced Host Interface. (Take
caution when using this function. This feature is for advanced programmers only.
The Enhanced AHCI mode is available when the Windows XP-SP1 OS and the
IAA Driver is used.) The options are Enabled and Disabled.
SATA AHCI Legacy
Select Enable to use Legacy Mode for SATA Advanced Host Interfacing. When
this feature is set to Enabled, SATA Port 5 and SATA Port 6 are disabled. (Take
caution when using this function. This feature is for advanced programmers only.)
The options are Enabled and Disabled.
SATA Port0/SATA Port1/SATA Port2/SATA Port3/SATA Port4/SATA
Port5
The se s etti ngs all ow the use r to se t t he p ara meters of SATA 0 ~ SATA 5 c o nne c tion s.
Hit <Enter> to activate  the following sub-menu screen for detailed options of
these items. Set the correct congurations accordingly. The items included in
the sub-menu are:
Type
This option allows the user to select the type of a SATA device. Select Auto
toallowtheBIOStoautomaticallyconguretheparametersofaSATAdevice
installed on a slot. Select User to allow the user to enter the parameters of the