User`s manual

2-26
X7SB4/X7SBE User's Manual
X7SB4
SCSI Enable/Disable (X7SB4
Only)
Jumper JPA1 allows you to enable or
disable the SCSI Controller. The default
setting is to close Pins 1-2 to enable the
SCSI connection. See the table on the
right for jumper settings.
SCSI Termination Enable/
Disable (X7SB4 Only)
Jumpers JPA2 allows you to enable or
disable the termination of the SCSI con-
nector. The default set ting is open to en-
able (-to terminate-) the SCSI channel.
(For SCSI to function properly, please do
not change the default setting.) See the
table on the right for jumper settings.
(Default: Open: Do not change the default setting!)
B
A
SCSI Enable
Jumper Settings
Pin#Denition
Pins 1-2 Enabled (default)
Pins 2-3 Disabled
A. SCSI Enable
B. SCSI Termination
Enable
SCSI Termination Enable
Jumper Settings
Pin#Denition
Open Enabled (default)
Closed Disabled