User`s manual

Chapter 2: Installation
2-25
Fan 1
LE2
8-Pin PWR
24-Pin PWR
KB/MS
USB0/1
COM1
VGA
PWR Force
GLAN1
GLAN2
JPF
FAN5
D31
BIOS
Slot 6 PCI-Ex8
Battery
VGA Memory
S I/O
COM2
JWD
JPG1
Slot 4 PCI 33MHz
Floppy
JI2C2
JI2C1
JPL2
JPL1
Buzzer
SD1
JWOL1
JWOR1
USB2/3
JBT1
T-SPGIO
LE4
LE5
I-SATA1
I-SATA3
I-SATA0 I-SATA2
FP CTRL
LE1
Chassis.
Intrusion
Fan 4
Fan 3
LE6
Fan 2
IDE#1
CPU 2
CPU 1
South
Bridge
North
Bridge
DIMM1A
DIMM1B
DIMM2A
DIMM2B
LAN CTRL
VGA CTRL
A
B
C
A. LE4: POST Code LED
B. LE5: POST Code LED
C. D31: Status LED
Status LED (D31)
There is a Status LED Indicator (D31)
located on the motherboard. This LED
displays different colors to show the sta-
tus of the system. Refer to the table on
the right for system status. See the layout
below for the LED location.
Status LED Indicator
LED Color Defi nition
Green Power On, system: normal
Red PWR on, PWR problem(s)
occur(s) or JPW3 not
properly installed
Yellow S5 or S4
POST Code LED Indicators
(LE4, LE5)
There are two POST Code LED Indica-
tors (LE4, LE5) located on the moth-
erboard. These two LEDs are used to
indicate POST (Power On Self Test)
Code Messages through different sets
of green and yellow light combinations.
Refer to the table on the right for POST
Code Messages. See the layout below
for the LED location.
POST Code LED Indicators
LE4 LE5 POST Code Message
Green: On Yellow: Off Memory Initialization @
POST 28h
Green: Off Yellow: On System Shadowing @
POST 38h
Green: On Yellow: On CPU Initialization @
POST 0Ah
Green Off Yellow: Off PCI Initialization @
POST 49h