User`s manual

2-24
X7DVL-L User's Manual
Fan 1
LE2
8-Pin PWR
24-Pin PWR
KB/MS
USB0/1
COM1
VGA
PWR Force
GLAN1
GLAN2
JPF
FAN5
D31
BIOS
Slot 6 PCI-Ex8
Battery
VGA Memory
S I/O
COM2
JWD
JPG1
Slot 4 PCI 33MHz
Floppy
JI2C2
JI2C1
JPL2
JPL1
Buzzer
SD1
JWOL1
JWOR1
USB2/3
JBT1
T-SPGIO
LE4
LE5
I-SATA1
I-SATA3
I-SATA0 I-SATA2
FP CTRL
LE1
Chassis.
Intrusion
Fan 4
Fan 3
LE6
Fan 2
IDE#1
CPU 2
CPU 1
South
Bridge
North
Bridge
DIMM1A
DIMM1B
DIMM2A
DIMM2B
LAN CTRL
VGA CTRL
GLAN LEDs
There are two GLAN ports on the moth-
erboard. Each Gigabit Ethernet LAN port
has two LEDs. The yellow LED indicates
activity, while the other LED may be
green, amber or off to indicate the speed
of the connection. See the tables at right
for more information.
2-7 Onboard Indicators
A
B
C
A. GLAN Port1 LEDs
B. GLAN Port2 LEDs
C. Onboard PWR LED
Activity
LED
GLAN Link Indicator
LED Color Defi nition
Off No Connection or 10 Mbps
Green 100 Mbps
Amber 1 Gbps
Link
LED
GLAN Activity Indicator
Color Status Defi nition
Yellow Flashing Active
Onboard Power LED (LE1)
An Onboard Power LED is located at LE1
on the motherboard. When this LED Indi-
cator is on, the system is on. Be sure to
unplug the power cable before removing
or adding any components. See the table
on the right for more details.
Onboard PWR LED Indicator (LE1)
LED Color Defi nition
Off System Off (*PWR cable
not connected)
Green System On
Green:
Flashing
Quickly
ACPI S1 State
Green:
Flashing
Slowly
ACPI S3 (STR) State
(Rear View: When viewing from the rear
side of the chassis.)