Datasheet

4-12
X6DHT-G User's Manual
ECC Error Type
This setting lets you select which type of interrupt to be activated as a
result of an ECC error. The options are None, NMI (Non-Maskable
Interrupt), SMI (System Management Interrupt) and SCI (System Control
Interrupt.)
SERR Signal Condition
This setting specifies the ECC Error conditions that an SERR# is to be
asserted. The options are None, Single Bit, Multiple Bit and Both.
USB Device 29, Function 0 & 1
This setting allows you to Enable or Disable two functions for the USB
devices specified.
Legacy USB Support
This setting allows you to enable support for Legacy USB devices. The
settings are Enabled and Disabled.
!!
!!
!Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.
Hyper-threading
This setting allows you to Enable or Disable the function of hyper-
threading. Enabling hyper-threading results in increased CPU
performance. (Applicable for the XP systems.)
Machine Checking
Enable this feature to allow the operating system to debug a system
crash after a reset. The options are Disabled and Enabled.
No Execute Mode Memory Protection
Enable this feature to enable the functionality of Execute Disable Bit and
allow the processor to classify areas in memory where an application
code can execute and where it can not, and thus, preventing a worm or
a virus from inserting and creating a flood of codes that will overwhelm
the processor or damage the system during an attack. (*Note: this
feature is available when your OS and your CPU support the function of
Execute Disable Bit.) The options are Disabled and Enabled. (Note: For
more information regarding hardware/software support for this function,
please refer to Intel's and Microsoft's web sites.)