Datasheet

4-10
X6DHT-G User's Manual
!!
!!
!PCI Configuration
Access the submenu to make changes to the following settings for PCI
devices.
Onboard GLAN1/ GLAN2 (Gigabit- LAN) OPROM Configure
Enabling this option provides the capability to boot from GLAN1/GLAN2.
The options are Disabled and Enabled.
Reset Configuration Data
If set to Yes, this setting clears the Extended System Configuration Data-
(ESCD) area. The options are Yes and No.
Frequency for Slot#2-Slot#3/MASS
This option allows the user to change the bus frequency for the devices
installed in the slot indicated. The options are Auto, PCI 33 MHz, PCI 66
MHz, PCI-X 66 MHz, PCI-X 100 MHz, and PCI-X 133 MHz.
Frequency for Slot#4
This option allows the user to change the bus frequency of the devices
installed in the slot indicated. The options are Auto, PCI 33 MHz, PCI 66
MHz, PCI-X 66 MHz, PCI-X 100 MHz, and PCI-X 133 MHz.
!!
!!
!PCI 33 MHz Slot #1, PCI-X 100 MHz Slot #2, PCI-X 100 MHz
ZCR Slot #3, PCI-X 133 MHz Slot #4, PCI-Exp x8 Slot#5, PCI-Exp
x8 Slot#6
Access the submenu for each of the settings above to make changes to
the following:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM.
The options are Enabled and Disabled.