Datasheet

4-4
X6DHT-G User's Manual
Parallel ATA
This setting allows the user to enable or disable the function of Parallel
ATA. The options are Disabled, Channel 0, Channel 1 and Both.
Serial ATA
This setting allows the user to enable or disable the function of Serial ATA.
The options are Disabled and Enabled.
Serial ATA RAID Enable
Select Enable to enable Serial ATA RAID Functions. (*For the Windows OS
environment, use the RAID driver if this feature is set to Enabled. If set to
Disabled, use the Non-RAID driver.)
Native Mode Operation
Select the native mode for ATA. The options are: Parallel ATA, Serial
ATA, Both, and Auto.
!!
!!
!IDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, IDE
Channel 2 Master, IDE Channel 3 Master
These settings allow the user to set the parameters of IDE Channel 0
Master/Slave, IDE Channel 1 Master/Slave, IDE Channel 2 Master, IDE
Channel 3 Master slots. Hit <Enter> to activate the following sub-menu
screen for detailed options of these items. Set the correct configurations
accordingly. The items included in the sub-menu are:
Type
Selects the type of IDE hard drive. The options are Auto, (which allows
BIOS to automatically determine the hard drive's capacity, number of
heads, etc.), a number from 1-39 to select a predetermined type of hard
drive, CDROM and ATAPI Removable. The option- "User" will allow the
user to enter the parameters of the HDD installed at this connection. The
option-"Auto" will allow BIOS to automatically configure the parameters
of the HDD installed at the connection. Choose the option 1-39 to select
a predetermined HDD type. Select CDROM if a CDROM drive is installed.
Select ATAPI if a removable disk drive is installed.