Datasheet

4-2
X6DHT-G User's Manual
4-2 Running Setup
*Default settings are in bold text unless otherwise noted.
The BIOS setup options described in this section are selected by choos-
ing the appropriate text from the main BIOS Setup screen. All displayed
text is described in this section, although the screen display is often all
you need to understand how to set the options (see on next page).
When you first power on the computer, the Phoenix BIOS™ is immediately
activated.
While the BIOS is in control, the Setup program can be activated in one of two
ways:
1. By pressing <Delete> immediately after turning the system on, or
2. When the message shown below appears briefly at the bottom of the
screen during the POST (Power On Self-Test), press the <Delete> key to activate
the main Setup menu:
Press the <Delete> key to enter Setup
(*Note: Please load "System Setup Default" when using the system the
first time.)
4-3 Main BIOS Setup
All main Setup options are described in this section. The main BIOS Setup
screen is displayed below.
Use the Up/Down arrow keys to move among the different settings in each
menu. Use the Left/Right arrow keys to change the options for each
setting.
Press the <Esc> key to exit the CMOS Setup Menu. The next section
describes in detail how to navigate through the menus.
Items that use submenus are indicated with the icon. With the item high-
lighted, press the <Enter> key to access the submenu.