User`s manual

Chapter 4: BIOS
4-15
Base I/O Address
Select the base I/O address for serial port A. The options are 3F8/IRQ4,
2F8/IRQ3, 3E8/IRQ4 and 2E8/IRQ3.
Onboard COM 2
This setting allows you to assign control of serial port B. The options are
Enabled (user defined), Disabled and Auto (BIOS controlled).
Base I/O Address
Select the base I/O address for serial port B. The options are 3F8/IRQ4,
2F8/IRQ3, 3E8/IRQ4 and 2E8/IRQ3.
Floppy Disk Controller
This setting allows you to assign control of the floppy disk controller. The
options are Enabled (user defined), Disabled, Auto (BIOS controlled) and
OS Controlled.
XX
XX
XDMI Event Logging
Access the submenu to make changes to the following settings.
Event Log Validity
This is a display to inform you of the event log validity. It is not a setting.
Event Log Capacity
This is a display to inform you of the event log capacity. It is not a setting.
View DMI Event Log
Highlight this item and press <Enter> to view the contents of the event
log.
Event Logging
This setting allows you to Enable or Disable event logging.
ECC Event Logging
This setting allows you to Enable or Disable ECC event logging.
Mark DMI Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear All DMI Event Logs
Select Yes and press <Enter> to clear all DMI event logs. The options are
Yes and No.