User`s manual

Chapter 4: BIOS

4-5

XIDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, IDE

Channel 2 Master, IDE Channel 3 Master

These settings allow the user to set the parameters of IDE Channel 0

Master/Slave, IDE Channel 1 Master/Slave, IDE Channel 2 Master, IDE

Channel 3 Master slots. Hit <Enter> to activate the following submenu

screen for detailed options of these items. Set the correct configurations

accordingly. The items included in the submenu are:

Type

Selects the type of IDE hard drive. The options are Auto, (which allows

the BIOS to automatically determine the hard drive's capacity, number of

heads, etc.), a number from 1-39 to select a predetermined type of hard

drive, CDROM and ATAPI Removable. The option "User" will allow the

user to enter the parameters of the HDD installed at this connection. The

option "Auto" will allow the BIOS to automatically configure the

parameters of the HDD installed at the connection. Choose the option 1-

39 to select a predetermined HDD type. Select CDROM if a CDROM drive

is installed. Select ATAPI if a removable disk drive is installed.