User`s manual

2-14
X10SBA/X10SBA-L User’s Manual
Embedded DisplayPort (eDP)
The eDP header is used to connect an
embedded display LED or LCD Panel.
eDP is a companion standard to the
DisplayPort interface designed for em-
bedded display applications, includ-
ing notebook PCs, tablets, netbooks
and all-in-one desktop PCs. Refer to
the table on right for pin denitions.
X10SBA support 3.3V eDP LED or
LCD panel only. The X10SBA support
eDP standard version 1.3. Refer to the
table on the right for more information.
Note: eDP will be disabled
by hardware when DP is con-
nected with active display.
Please make sure no display
connected to back panel DP
port when eDP function is
required.
X10SBA(-L)
Rev.
1.01A
JSMB1
J31
JBT1
BT2
M-SATA0M-SATA1
M-SATA2
M-SATA3
JP1
LAN1LAN2
JDIMM2
PJ1
JF1
JTPM1
JOH1
JSPDIF_OUT
JPUSB1
JPAC1
JPME2
JD1
VGA
FAN1
FAN2
I-SATA1
COM4
COM2
SP1
JSD1
JDIMM1
LED3
LED4
LED2
JPW1
SMBUS1
SLOT1 PCI-E 2.0 X2 (IN X8)
USB4/5
USB6
AUDIO FP
SODIMM2 (1.35V only)
USB1(2.0)
USB0(3.0)
CPU
(Install first)SODIMM1(1.35V only)
eDP
Non-ECC DDR3 Required
HDMI/DP
COM3
FP CTRL
BIOS
BAR CODE
J1
(for mini-PCI-E only)
(for M-SATA only)
J2
COM1
(for X10SBA only)
(for X10SBA only)
(for X10SBA only)
(for X10SBA)
LED1
LED5
USB2/3
I-SATA0
A
A. Embedded Dis-
playPort (eDP)
Embedded DisplayPort (eDP)
Pin Denitions
Pin# Denition Pin# Denition
1 LCD_VCC 23 Lane0_N
2 LCD_VCC 24 Lane0_P
3 LCD_VCC 25 H_GND
4 LCD_VCC 26 AUX_CH_P
5 LCD_VCC 27 AUX_CH_N
6 LCD_GND 28 NC
7 LCD_GND 29 VCC3_3
8 LCD_GND 30 NC
9 LCD_GND 31 BL_PWR
10 HPF 32 NC
11 NC 33 GND
12 NC 34 VCC5
13 H_GND 35 L_CTRL_CLK
14 Lane3_N 36 L_BKLT_CTRL
15 Lane3_P 37 L_BKLT_EN
16 H_GND 38 BL_PWR
17 Lane2_N 39 VCC3_3
18 Lane2_P 40 H_GND
19 H_GND 41 SMB_CLK
20 Lane1_N 42 SMB_DATA
21 Lane1_P 43 NC
22 H_GND 44 NC