User`s manual

1-6
PDSML-LN1+/PDSML-LN2+/PDSML-E+ User’s Manual
Motherboard Features
Processor
• Single Intel Xeon 3200/3000/Core 2 Duo Series//Pentium D dual-core/Pentium
4/Celeron D processors at system bus speeds of 1066/800/533 MHz.
• Hyper-Threading (HT), EM64T, Enhanced Intel SpeedStep (EIST) supported
The EM64T Feature is supported when:
• 64-bit OS (Windows XP Professional x64 Ed, Server 2003x64 Ed.) and
• 64-bit drivers for all MB components, devices and add-on cards are installed
on the motherboard.
Hyper-Threading (HT) Technology is supported when:
• A CPU that supports Hyper-Threading Technology is used,
• An OS that supports HT is installed onboard, including Windows XP/2003
Server and Linux 2.4x. (Under Linux, use the HT compiler to compile the code.
For other operating systems, be sure to disable the HT feature in the BIOS.)
• HT features are enabled in the BIOS (under the "Advanced" Setting) before
a supported OS is installed. (Note: visit www.Intel.com for CPU support and
driver updates.)
Memory
• Four DIMM slots support single/dual Channel DDR2 667/533/400 MHz up to 8
GB of Unbuffered ECC/Non ECC SDRAM.
Chipset
• Intel 3000 (PDSML-LN1+ and PDSML-LN2+)
• Intel 3010 (PDSML-E+)
• Intel ICH7R
Expansion Slots
• Two (2) PCI 32-Bit/33 MHz slots (Slot 4 & SBX)
• Two (2) PCI-Express slots: x4 (Slot 5) & x8 (Slot 6)
BIOS
• 8Mb Firmware Hub, Phoenix
®
BIOS
• DMI 2.3, PCI 2.2, ACPI 1.0, Plug and Play (PnP), SMBIOS 2.3, Hardware BIOS
Virus Protection
PC Health Monitoring
• Onboard voltage monitors for CPU core, Memory, +1.5V, +1.8V, +3.3V, +5V, +5V
Standby, +12V, −12V, Vbatt and VTT.
• Status monitor for fan speed & System Overheat/Fan Fail LED/Control
• Pulse Width Modulation Fan Control & Low noise fan speed control
• SuperDoctor III, NMI
• System Resource alert via SuperDoctor III