User`s manual

Chapter 1: Introduction
1-5
PDSML-LN1+/PDSML-LN2+/PDSML-E+ Quick Reference
Jumpers Description Default Setting
JBT1 CMOS Clear See Section 2-7
JI
2
C1/JI
2
C2 I
2
C Bus to PCI Slots 1/2 Open (Disabled)
JPF Power Force-On Open (Disabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1/JPL2 (Note) Giga-bit LAN 1/2 Enable Pins 1-2 (Enabled)
Connectors Description
24-PIn ATX (JPW1) ATX 24-pin Power Connector
8-Pin PWR (JPW2) 12V 8-pin PWR Connector
Alarm Reset (JPR1) Redundant Power Alarm Reset
Chassis Intrusion (JL1) Chassis Intrusion Header
COM1 (J31), COM2 COM Port 1 & COM 2 Header
DIMM#1A,#2A,#1B,#2B Memory (DIMM) Slots (DIMM 1-DIMM 4)
Fans 1-6 System Fan Headers (Fans 1-5), Fan6: CPU Fan
FP Control (JF1) Front Panel Control Header
Floppy Connector (J27) Floppy Disk Connector
IDE (J3) IDE#1 Slot
IPMI (Note) IPMI 2.0 Slot
KB/MS (J28) PS/2 Keyboard/Mouse Connectors
LAN1-LAN2 (JLAN1/2)(Note) Ethernet RJ45 (Gigabit LAN) Port1/Port2 Connections
Power Fault (PW3) Power Fault Header
Power LED (JLED) PWR LED Header
Power SMB (I
2
C) (PW4) Power SMB (System Management Bus) Connector
SATA 0-3 Intel SATA Ports (#1-#4)
Slot 4 PCI 32-bit 33MHz slot
Slot 5 PCI-Express x4 slot
Slot 6 + SBX PCI-Express x8 slot + SBX: PCI 32-bit 33MHz slot
Speaker (J9) Speaker Connector (Pins 3-4:Internal,Pins 1-4:External)
USB1/2 (J15) Back Panel Universal Serial Bus Ports 1,2
USB3/4 (J46),USB5/6 (J45) Front Panel Accessible USB Ports 3,4,5,6
VGA (JG1) VGA Connector
WOL (WOL) Wake On LAN header
WOR (JWOR) Wake On Ring header
LED Indicator Description (*(Refer to Addendum A)
LE 1 Onboard PWR warning LED Indicator
LE3/LE4 BIOS POST Code Indicators
Note: JPL2, IPMI and LAN2 are available on the PDSML-LN2+ and PDSML-E+only.
Please refer to Note 5 on the previous page.