User`s manual
Chapter 4: BIOS
4-7
POST Beeps
Select Enabled to activate the alarm if an error occurs at bootup. If set to Disabled,
the alarm will not be activated even if a boot error occurs.
ACPI Mode
Select Yes to use the ACPI (Advanced Conguration and Power Interface) power
management on your system. The options are Yes and No.
ACPI Sleep Mode
Use this setting to congure the ACPI (Advanced Conguration and Power Inter-
face) power management mode on your system when it is in the sleep mode. The
options are S1, S3 and S1S3.
Enable Multimedia Timer
Select Yes to enable the onboard multimedia timer. The options are Yes and No.
Power Button Behavior
If set to Enabled, the system will power on or power off immediately as soon as the
user hits the power button. The options are Enabled and Disabled.
Resume On Modem Ring
Select On to “wake your system up” when an incoming call is received by your
modem. The options are On and Off.
Resume On PME#
Select On to “wake your system up” from the PME#. The options are On and Off.
PS2 Keyboard (KB)/Mouse Wake Up
Select Enable to “wake your system up” from the S3, S4 or S5 state. If this feature
is set enabled, you will also need to enable the JPWAKE jumper by closing pins
1-2. (Please refer to Page 1-5 and Chapter 2 for more details). The default setting
is Disabled.
Power Loss Control
This setting allows you to choose how the system will react when power returns after
an unexpected power loss. The options are Stay Off, Power On, and Last State.
Watch Dog
If enabled, this option will automatically reset the system if it is not active for more
than 5 minutes. The options are Enabled and Disabled.