User`s manual

Chapter 4: BIOS
4-5
removable disk drive is installed.
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be used
for multi-sector transfer. The options are Disabled, 4 Sectors, 8 Sectors, and
16 Sectors.
32-Bit I/O
Select Enable to enable the function of 32-bit IDE data transfer. The options
are Enabled and Disabled.
LBA Mode Control
This item determines whether the Phoenix BIOS will access the IDE Primary
Master device via the LBA mode. The options are Enabled and Disabled.
Transfer Mode
This option allows the user to set the transfer mode. The options are Standard,
Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/DMA1 and FPIO4/DMA2.
Ultra DMA Mode
This option allows the user to congure the Ultra DMA Mode. The options are
Disabled, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4, and Mode 5.
System Memory
This feature informs you how much system memory has been detected by the
BIOS.
Extended Memory
This feature informs you how much extended memory has been detected by the
BIOS.