User`s manual

H8SML-7/i(F) SERVERBOARD USER'S MANUAL
2-22
SATA Ports
There are no jumpers to configure
the SATA ports, which are designated
SATA0 through SATA5. See the table
on the right for pin defi nitions.
SATA Ports
Pin Defi nitions
(SATA0-SATA5)
Pin # Defi nition
1 Ground
2 TXP
3 TXN
4 Ground
5 RXN
6 RXP
7 Ground
SAS Ports
Pin Defi nitions
(SAS0 ~ SAS7)
Pin# Defi nition Pin # Defi nition
1 Ground 2 TXP
3 TXN 4 Ground
5 RXN 6 RXP
7 Ground
SAS Ports
There are eight SAS ports included on
the H8SML-7/H8SML-7F serverboards
only. See the table on the right for pin
defi nitions.
Note: JPS1 must be set correctly to
enable the SAS controller.
2-11 SAS and SATA Drive Connections