User`s manual

Chapter 2: Installation
2-21
LAN1/LAN2 LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each Gb
LAN port, one LED blinks to indicate
activity while the other may be green,
amber or off to indicate the speed of
the connection. See the table on the
right for the functions associated with
the connection speed LED.
LAN LED
(Connection Speed
Indicator)
LED Color Defi nition
Off 10 MHz
Green 100 MHz
Amber 1 GHz
Power LED
DS1 is an Onboard Power LED.
When this LED is lit, it means power
is present on the serverboard. Be
sure to turn off the system and unplug
the power cord(s) before removing or
installing components.
Power LED
(DS1)
State System Status
On Standby power present
on motherboard
Off No power connected
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also included
on the H8SML-7F and H8SML-iF
serverboards. The amber LED on the
right indicates activity, while the green
LED on the left indicates the speed of
the connection. See the table at right
for more information.
IPMI LAN Link LED
(Left) & Activity LED (Right)
Color Status Defi nition
Green:
Solid
Link
(Left)
100 Mb/s
Amber
Blinking
Activity
(Right)
Active
IPMI LED
The serverboard contains an IPMI LED
(DP1) located near the corner above
the PCI-E slots. When this LED is lit,
it means a connection is active for the
built-in IPMI on the serverboard.
Note: This LED is not installed on non-
IPMI boards.
IPMI LED (DP1)
State System Status
On Active connection
Off No connection
2-10 Onboard Indicators