User`s manual

Chapter 1: Introduction
1-5
H8DSL-HTi Quick Reference
Jumpers Description Default Setting
J3P 3rd Power Fail Detect Closed (Enabled)
JAR Alarm Reset Open (Disabled)
JBT1 CMOS Clear See Section 2-7
JD1 Onboard Spkr En/Disable Pins 6-7 (Enabled)
JI
2
C1/2 I
2
C to PCI Enable/Disable Closed (Enabled)
JPF Power Force On Open (Normal)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL LAN Enable/Disable Pins 1-2 (Enabled)
JPX1A PCI-X Slot #6 Freq. Select Pins 2-3 (133 MHz)
JPX1B PCI-X Slot #6 Freq. Select Open (Auto)
JWD Watch Dog Pins 1-2 (Reset)
Connectors Description
1U IPMI IPMI 2.0 Slot
COM1/COM2 COM1/2 Serial Port/Header
FAN1-5 Fan Headers
Floppy Floppy Disk Drive Connector
IDE#1 IDE#1 Connector
J1B4 Primary ATX Power Connector
J32 Auxiliary Power Connector
JD1 Power LED/Speaker Header
JF1 Front Panel Headers
JL1 Chassis Intrusion Header
JOH1 Overheat LED Header
JPI
2
C SMBus Power Header
JPW2 8-Pin Power Connector
JPWF Power Fault Header
JSLED SATA Activity LED Header
JSMB 1 System Management Bus Header
JWOL Wake-On-LAN Header
JWOR Wake-On-Ring Header
LAN1/2 Gigabit Ethernet Ports
SATA0-3 Serial ATA Ports (SATA0/1/2/3)
USB0/1/2/3 Universal Serial Bus Ports (0/1) and Headers (2/3)
VGA Video (Monitor) Port
Onboard LEDs Description
DB1-DB8 POST Code LEDs
DP1 +3.3V Standby Power LED