User`s manual

Intel® AMT Management Engine Setup
C-3
If you see the following message: "Error - Intel(R) ME password change rejected",
then you are using a weak password. Please enter a different password.
3. Select "Intel® ME General Settings" at the MAIN MENU.
4. Select "Intel® ME State Control", and set this to "Enabled." Press <Enter>.
The system will now reboot.
Intel (R) Management Engine BIOS Extension v6.0.3.019/Intel (R) ME Firmware versioin 6.0.4.0.1215
Copyright (C) 2003-09 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
[ESC]=Exit [ENTER]=Access
[ ]=Select
Intel (R) ME General Settings
Intel (R) AMT Configuration
Exit