User`s manual

Chapter 2: Installation

2-3

4. With the CPU inserted into the

socket, inspect the four corners of the

CPU to make sure that it is properly

installed and ﬂ ush with the socket.

Installing the Heatsink

We recommend the use of active type heatsinks (except for 1U systems). Connect

the heatsink fans to a fan header near the CPU. To install the heatsinks, please

follow the instructions included with your heatsink package (not included).

5. Gently press the CPU socket lever

down until it locks in the plastic tab.

Installing the Heatsink Retention Modules

One heatsink retention module (BKT-0018L) and two screws are included in the

retail box. Once installed, these are used to help attach the heatsink to the CPU.

To install, position the module so that the CPU backplate standoffs insert through

the holes on the heatsink retention module and the four feet on the module contact

the motherboard. Secure the retention module to the backplate with the two screws

provided. See Figure 2-1. Note: BKT-0018L is included for use with non-proprietary

heatsinks only. When installing proprietary heatsinks, only BKT-0017L (the CPU

backplate) is needed. The BKT-0018L retention module was designed to provide

compatibility with clip-and-cam type heatsinks from third parties.

Figure 2-1. CPU Backplate/Heatsink Retention Module Installation