User`s manual

Chapter 1: Introduction
1-5
H8SSL-i2 Quick Reference
Jumpers Description Default Setting
JBT1 CMOS Clear See Section 2-7
JD1 Onboard Speaker En/Disable Pins 6-7 (Enabled)
JPF Power Force On Open (Normal)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL LAN Enable/Disable Pins 1-2 (Enabled)
JI
2
C1/JI
2
C2 I
2
C Enable/Disable Pins 1-2 (Enabled)
JPX1A PCI-X Slot #6 Freq. Open (Auto)
JWD Watch Dog Pins 1-2 (Reset)
Connectors Description
IPMI IPMI 2.0 Slot
COM1/COM2 COM1 Serial Port/Header
FAN1 - 5 Fan Headers
Floppy Floppy Disk Drive Connector
IDE#1 IDE Connector
J1B4 Primary 24-pin ATX Power Connector
J6 Secondary 4-pin Power Connector
JD1 Power LED/Speaker Header
JF1 Front Panel Connector
JL1 Chassis Intrusion Header
JOH1 Overheat Warning Header
JP11 Power Supply Fail Alarm Reset Header
JPI
2
C Power I
2
C Header
JPWF Power Supply Fail Signal Header
JS9 Serial ATA LED Activity Header
JWOL Wake-On-LAN Header
JWOR Wake-On-Ring Header
LAN1/2 Gigabit Ethernet (RJ45) Ports
SATA0/1/2/3 Serial ATA Connectors
USB0/1 USB (Universal Serial Bus) Ports 0/1
USB2/3 USB2/3 Headers
VGA Video (Monitor) Port
Onboard LEDs Description
DP1 - DP4 Serial ATA Activity LEDs
DP6 Onboard Power LED