Datasheet

Chapter 2: Installation
2-13
Wake-On-LAN
The Wake-On-LAN header is desig-
nated JWOL. See the table on the
right for pin defi nitions. You must
have a LAN card with a Wake-On-LAN
connector and cable to use the Wake-
On-LAN feature.
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR. This function allows
your computer to receive and "wake-
up" by an incoming call to the modem
when in suspend state. See the table
on the right for pin defi nitions. You
must have a Wake-On-Ring card and
cable to use this feature.
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin# Defi nition
1 Ground (Black)
2 Wake-up
Wake-On-LAN
Pin Defi nitions
(JWOL)
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up
SMB Power (I
2
C) Header
The header at J24 is for I
2
C, which
may be used to monitor the status of
the power supply, fans and system
temperature. See the table on the right
for pin defi nitions.
SMB Power (I
2
C)
Pin Defi nitions (J24)
Pin# Defi nition
1Clock
2 Data
3N/A
4N/A
5N/A
SMB Header
The System Management Bus header
is located at J22. Connect the appro-
priate cable here to utilize SMB on your
system. See the table on the right for
pin defi nitions.
SMB
Pin Defi nitions (J22)
Pin# Defi nition
1 SMB Data
2 Ground
3 SMB Clock
4N/A