Datasheet

ManualsBrandsSupermicro Manualschassis componentsCSE-M34T

Rev. 1.0

SUPER

USER'S GUIDE

Mobile Rack

CSE-M34S/CSE-M34T

Summary of content (8 pages)

PAGE 1
SUPER ® CSE-M34S/CSE-M34T Mobile Rack USER'S GUIDE Rev. 1.
PAGE 2
SUPER CSE-M34S/CSE-M34T User's Guide Table of Contents 1. Packaging List .................................................................................................... 3 2. Technical Specifications ................................................................................... 3 3. Jumper Settings ................................................................................................. 4 4. Hardware Installation Procedures ................................................................
PAGE 3
Packing List CSE-M34S/CSE-M34T Supermicro’s CSE-M34S/CSE-M34T Mobile Rack Series offers the cutting edge technology with greater flexibility. The CSE-M34T supports four Serial ATA hot-swappable hard drives that yield a unparalleled storage capacity without compromising productivity by eliminating possible system downtime. The CSE-M34S also accommodates four SCSI SCA 320/160 Hard drives which provide configuration flexibility and maximum data integrity. 1.
PAGE 4
SUPER CSE-M34S/CSE-M34T User's Guide 3. Jumper Settings A.
PAGE 5
Jumper Settings B.
PAGE 6
SUPER CSE-M34S/CSE-M34T User's Guide 4. Hardware Installation Procedures (*Note: For the CSE-M34S: 1. SCSI IDs are assigned automatically by the backplane. Do not set IDs manually on the drives. See the previous section for SCSI ID jumper settings. 2. SCSI termination is enabled by default on the SCSI backplane.) A. Accessing Hot Swappable Drives: 1.Push the release button and pull up the handle to release the drive tray as shown below on the left: 2.
PAGE 7
Installation Procedures B. Accessing the Drive Backplane: 1. Remove the two screws as shown below: Remove the screws The CSE-M34T (SATA) Model The CSE-M34S(SCSI) Model 2. Pull out the rear fan bracket as shown below: Pull out the rear fan bracket The CSE-M34S(SCSI) Model The CSE-M34T(SATA) Model 3.
PAGE 8
SUPER CSE-M34S/CSE-M34T User's Guide 5. SCSI (Super) GEM Driver Installation Instructions for Windows OS Please refer to the following instructions to install Driver for the Windows OS systems. the SCSI GEM (*Note: This driver is not necessary for other Operating Systems. If you have two SCA backplanes, you will need to install the driver twice.) The driver is located on the Super Micro motherboard driver CD or is available for download from our FTP site: ftp://ftp.supermicro.