User`s manual

4-19

Chapter 4: Chassis Setup and Maintenance

4-10 Changing the CD-ROM or DVD-ROM and HDD Trays

The SC846 chassis supports the following drive configuration options:

Position Description

Position A N/A (Default), or single 3.5" HDD tray, or dual 2.5" HDD tray.

Position B Dummy cover (default), or single 3.5" HDD tray, single 2.5"

HDD tray, DVD, or FDD.

After selecting one of the drive conguration options listed above, use the following

instructions to install the drives and their trays into the chassis.

Installing the Fixed Hard Drive

1. Power down the system and unplug the power cord from the back of the

power supplies and remove the chassis cover.

Figure 4-21: Drive Location Options