User`s manual
SC846 Chassis Manual
4-10
4-5 Installing the Air Shroud
Air shrouds concentrate airow to maximize fan efciency. The SC846 chassis air
shroud does not require screws to set up
Installing the Air Shroud
1. Power down the system, remove the power cords from the rear of the power
supplies and remove the cover as described in Section 4-1.
2. Conrm that your air shroud matches your chassis model. Each shroud is
labeled SC846LP, SC846RC, or SC846U.
3. Disconnect the power supply, lay the chassis on a at surface, and open the
chassis cover.
4. Place air shroud in the chassis. The air shroud ts behind the two fans clos-
est to the power supply.
Figure 4-12: Air Shroud for SC846LP Chassis