User`s manual
SC846 Chassis Manual
4-4
The drives are mounted in drive carriers to simplify their installation and removal
from the chassis. These carriers also help promote proper airow for the drive bays.
Warning: Except for short periods of time (swapping hard drives), do not operate
the server with the hard drive bays empty.
Figure 4-3: Chassis Drive Carrier
Installing a Hard Drive into the Hard Drive Carrier
1. Remove the two screws securing the dummy drive to the drive carrier and
remove the dummy drive. Place the drive carrier on a at surface such as a
desk, table or work bench.
Figure 4-4: Removing a Dummy Drive from the Drive Carrier
Drive Carrier
Dummy Drive
1
1