User`s manual
SC846 Chassis Manual
4-2
4-2 Removing the Chassis Cover
Figure 4-1: Removing the Chassis Cover
Release Tab
Remove this screw
(if necessary)
2
2
3
4
Removing the Chassis Cover
1. Power down the system and remove the power cords from the back of the
power supplies.
2. Press the release tabs to remove the cover from the locked position. Press
both tabs at the same time.
3. Once the top cover is released from the locked position, slide the cover
toward the rear of the chassis.
4. Lift the cover off the chassis.
Warning: Except for short periods of time, do NOT operate the server without the
cover in place. The chassis cover must be in place to allow proper airow and
prevent overheating.