User`s manual
F-9
Appendix F: SC846B Chassis Speciî‚¿cations
12. Place the hard drive assembly into the chassis, positioning it so that the
mounting holes in the front of the hard drive align with those in the front of
the the chassis and the mounting holes in the interior wall of the power sup-
ply bay align with those on the hard drive cage.
13. Secure the hard drive assembly to the chassis using two screws on the inte-
rior wall, and two screws on the rear of the chassis
1
13
Figure F-10: Installing the Hard Drive Assembly into the Chassis
14. Connect the SATA cable to the SATA port on the backplane
15. Connect the power cords to the power supplies and power-up the server.