User`s manual

5-12
SC842 Chassis Manual
Installing Expansion Cards
1. Shut down the system using the operating system, remove the power cord
from the rear of the chassis and open the chassis cover.
2. Locate the motherboard port which is aligned with the card slot you want to
install.
3. Each PCI slot cover is secured by one screw located on the top of the cover.
Remove this screw and slide the slot cover up and out of the slot. Set the
screw aside for use in Step 5.
4. Gently slide the expansion card into the correct motherboard slot. Never force
a component into a motherboard or the chassis.
5. Secure the expansion card with the screw set aside in Step 3.
Expansion Card Setup
The SC842 chassis features PCI slots which support expansion cards. The
SC842XTQ model (above) has eleven PCI slots. All other models (below) have
seven PCI slots.
Figure 5-11: PCI Slots
PCI Slots for
Expansion Cards