User`s manual

5-3
Chapter 5 Chassis Setup and Maintenance
5-3 Installing Hot-Swap Hard Drives
The hot-swappable hard drives are mounted in drive carriers to simplify their instal-
lation and removal from the chassis. The SC842 chassis supports up to ve 3.5"
hard drives.
Removing Hard Drive Carriers (SC842TQ and SC842XTQ)
Removing the Hard Drive and Hard Drive Carriers
1. Press the release button on the drive carrier. This extends the drive carrier
handle.
2. Use the handle to pull the drive carrier out of the chassis.
Figure 5-2: Removing the Hard Drive Carriers
Release Buttons