User`s manual

5-2
SC842 Chassis Manual
5-2 Removing the Chassis Cover
Removing the Chassis Cover
1. Remove the screw at the rear of the chassis and set it aside for later use.
2. Remove the two screws on the sides of the cover and set them aside.
3. Lift the cover up and off the chassis.
Figure 5-1: Removing the Chassis Cover
Warning: Except for short periods of time, do NOT operate the
chassis without the cover in place. The chassis cover must be
in place to allow proper airow and prevent overheating.
!
3
2
1
2
1