User`s manual

SC836 Chassis Manual
5-18
Replacing or Installing the Front Port Panel
Installing the Front Panel
Power down and unplug the system.1.
Remove the chassis cover.2.
(If you are not installing a new front port panel) 3. Remove the mini-bezel
(grate) from the drive bay The mini-bezel is the small grating that covers the
drive bay. Remove this by simply pulling it out of the bay.
(If you are installing a new front port panel) Remove the old front port
panel by depressing the release tab, then pulling the front port panel out of
the chassis.
Insert the new unit in the slot until the tab locks into place.4.
Connect the data and power cables to the backplane and, if necessary, 5.
motherboard.
For more information, see the manual for your backplane in the appendix.6.