User`s manual

5-9
Chapter 5 Chassis Setup and Maintenance
Installing an I/O Port Panel
Installing the I/O Panel
Remove the chassis cover.1.
Locate the I/O port panel.2.
Depending on your motherboard, you must remove the existing port shield 3.
and replace with the new one or use the existing the shield to slide the ports
through.
Connect the port panel to the motherboard following the motherboard docu-4.
mentation.
PS/2 ports
USB ports
Parallel port
Serial/
COM ports
VGA or Video
port
LAN port
Figure 5-5: SC836 Chassis Port Panel