User`s manual

SC836 Chassis Manual
5-6
Remove any packaging from the chassis. If the rear fans (set of two fans 4.
nearest the I/O slots) or the air shroud is in place, remove them.
If required by your motherboard, install standoffs in any areas that do not 5.
have a permanent standoff. To do this, tighten a hexagonal optional standoff
into the chassis.
Lay the motherboard on the chassis aligning the permanent and optional 6.
standoffs.
Secure the motherboard to the chassis using the rounded, Phillips head 7.
screws.
Secure the CPU(s) and heatsinks to the motherboard.8.