User`s manual

SC836 Chassis Manual
5-4
Place the hard drive tray on a at, stable surface such as a desk, table, or 2.
work bench.
Slide the hard drive into the tray with the printed circuit board side facing 3.
down.
Carefully align the mounting holes in the hard drive and the tray. Make sure 4.
the bottom of the hard drive and bottom of the hard drive tray are ush.
Secure the hard drive using all six (6) screws.5.
Replace the drive tray into the chassis. Make sure to close the drive tray us-6.
ing the drive tray handle.
Hard Drive
Tray
SAS/SATA or SCSI
Hard Drive
Figure 5-3: Installing a SAS or SATA Drive to Hard Drive Tray
Use a Hard, Stable
Surface when installing
the Hard Drive