User`s manual

5-3
Chapter 5 Chassis Setup and Maintenance
Removing Hard Drive Trays from the Chassis
Removing HDD Trays
Press the release button on the drive tray. This extends the drive bay handle.1.
Use the handle to pull the drive out of the chassis. When replacing the tray 2.
use the handle to lock the tray into place.
5-4 Installing the Hard Drives
The drives are mounted in drive trays to simplify their installation and removal from
the chassis.
Installing a Hard Drive to the Hard Drive Tray
Installing an HDD in a Tray
Remove the screws (2) securing the dummy drive to the drive tray and sepa-1.
rate the dummy drive.
Figure 5-2: Removing Dummy Drive from Tray
Drive Tray
Dummy Drive
Release Button