User`s manual
5-1
Chapter 5 Chassis Setup and Maintenance
Chapter 5
Basic Chassis Setup
and Maintenance
5-1 Overview
This chapter details the basic steps required to install components to the chassis.
The only tool you will is a Phillips screwdriver. Print this page to use as a reference
while setting up your chassis.
When coupled with an 836E series backplane, this chassis is capable of failover,
and cascading. Review Chapter 6 and the 836E Series Backplane Manual for
setup instructions.
5-2 Installation
Removing the Chassis Cover
Installing Hard Drives
Motherboard Installation (includes motherboard power supply and I/O slot setup)
Installing the Air Shroud
Installing System Fans
Replacing the Power Distributor
Replacing the DVD-ROM, Front Panel and Floppy Drive.
Review the warnings and precautions listed in the manual be-
fore setting up or servicing this chassis. These include infor-
mation in Chapter 2: System Safety and the warning/precau-
tions listed in the setup instructions.
!
Note: The SC836E1 and SC836E2 chassis support SAS drives
only. For more information, review the SAS 836EL Backplane
Speciî‚¿cations located in the appendices of this document.
!