User`s manual

SC829 Chassis Manual
5-22
5-12 Replacing or Installing the Front Port Panel
Replace or Install the Front Port Panel
1. Power down the system, unplug the power cord from the power supply and
remove the chassis cover.
2. Disconnect the power and data cables from the front port panel to other chas-
sis components including the motherboard and backplane.
3. Remove the old port panel by depressing the release tab, then pulling the unit
out of the chassis.
4. Insert the new front port panel unit in the slot until the tab locks into place.
5. Connect the data and power cables to the backplane and motherboard.
6. For more information, see the backplane appendix in this manual.