User`s manual
5-13
Chapter 5: Chassis Setup and Maintenance
PCI/PCIE Slot Setup for SC829BTQ-R920WB (Wide I/O)
SC829BTQ-R920WB chassis accepts a slightly smaller "L" shaped motherboard to
allow for a universal expansion card. This universal output card allows the system
to accept SAS, IB, Ethernet, and other types of connections.
The SC829BTQ-R920WB chassis setup is similar to the SC829TQ-R920LPB chas-
sis with two differences:
A. The SC829BTQ-R920WB chassis accepts four full-length, full-height expansion
cards and two low-prole expansion cards. The fourth slot (bottom slot) is used for
the WIO card.
B. The SC829BTQ-R920WB chassis includes a bracket that extends from the fan
row to the back of the chassis. This bracket provides support for the riser card.
Installing a Wide Input/Output Card in the SC829BTQ-R920WB chassis:
1. Power-down the server, disconnect the power cord from the power supply, lay
the chassis on a at surface, and open the chassis cover.
2. Connect the wide input/output to the motherboard using the slots provided on
the motherboard and the back panel.
3. Secure the card to the chassis using the four screws provided with the chas-
sis packaging.
The SC829BTQ-R920WB chassis has four full-height/full-length PCI/PCIE slots
and two low-prole slots.
Installing Expansion Cards in the SC829BTQ-R920WB Chassis
1. Power down the server, disconnect the power cord from the power supply, lay
the chassis on a at surface, and open the chassis cover.
2. If you are using a universal input/output card, make sure it is installed before
continuing.
3. If you installing low-prole expansion cards, remove the chassis air shroud.
4. Secure the card to the chassis using the four screws provided with the chas-
sis packaging.