User`s manual
SC829 Chassis Manual
5-12
PCI Slot Setup for SC829TQ-R920UB (Universal Output)
SC829TQ-R920UB chassis accepts a slightly smaller "L" shaped motherboard to
allow for a universal expansion card. This universal output card allows the system
to accept SAS, SCSI, IB, Ethernet, and other types of connections.
The SC829TQ-R920UB chassis setup is similar to the SC829TQ-R920LPB chassis
with two differences:
A. The SC829TQ-R920UB chassis accepts four full-length, full-height expansion
cards and two low-prole expansion cards. The fourth slot (bottom slot) is used
for the UIO card.
B. The SC829TQ-R920UB chassis includes a bracket that extends from the fan
row to the back of the chassis. This bracket provides support for the riser card.
Installing a Universal Input/Output Card in the SC829TQ-R920UB chassis:
1. Power down the server, disconnect the power cord from the power supply, lay
the chassis on a at surface, and open the chassis cover.
2. Connect the universal input/output to the motherboard using the slots pro-
vided on the motherboard and the back panel.
3. Secure the card to the chassis using the four screws provided with the chas-
sis packaging.
The SC829TQ-R920UB chassis has four full-height/full-length PCI slots and two
low-prole slots.
Installing Expansion Cards in the SC829TQ-R920UB Chassis
1. Power down the server, disconnect the power cord from the power supply, lay
the chassis on a at surface, and open the chassis cover.
2. If you are using a universal input/output card, make sure it is installed before
continuing.
3. If you installing low-prole expansion cards, remove the chassis air shroud.
4. Secure the card to the chassis using the four screws provided with the chas-
sis packaging.