User`s manual

D-12
Appendix D SAS 826EL Backplane Specifications
Description: This cable has one SFF-8484 (32 pin) connector on one end and
ipass (SFF-8087/mini-sas) connector (36 pins) at the other. This cable connects
from the HBA to the 826 EL backplane.
Cable Name: IPASS TO 4-LANE
Part #: CBL-0117 Length: 46 cm (18 inches)
Connecting an Internal Host Bus Adapter to the
Backplane
The following section lists the most common cables used to connect the HBA to
the backplane.
HBA (Host Bus Adapter)
HBA (Host Bus Adapter)
HBA
(Host Bus Adapter)
Single Internal Host Bus Adapter
Dual Internal Host Bus Adapter
Supported Internal HBA to Backplane Cables
Use the following listed cables to create connections between the internal HBA and
backplane. The cables required depend on the HBA connector.