Manualshelf

User`s manual

ManualsBrandsSupermicro Manualschassis componentsCSE-747TQ-R1400B-SQ
919293949596979899100
SC747 Chassis Manual
D-15
Removing Hard Drive Carriers from the Mobile Rack
1. Push the release button on the hard drive carrier, which will extend the drive
handle.
D-16 Installation Procedures
Use the following installation procedures to set up the mobile rack.
WARNING!
SAS IDs are assigned automatically by the backplane. Do not
set ID's manually on the drives.
SAS termination is enabled by default on the SAS backplane.
!
Removing Hard Drive Carriers from the Mobile Rack
The hard drives of the M35S and M35T1 mobile racks are mounted in drive carriers
to simplify their installation and removal from the chassis. These carriers also help
to promote proper airow within the mobile rack drive bays.
Figure D-5: Hard Drive Carrier Release Button
Release Button