User`s manual

SC747 Chassis Manual
5-22
4. Remove the screw holding the bracket in place and pull the bracket from the
chassis.
5. Install your expansion card into the PCI slot bracket and motherboard. To do
this, slide the expansion card (with "L" bracket) into the PCI slot and secure
the card to the motherboard.
6. Push the PCI bracket release tab down until it locks into place with an audible
"click".
7. Secure the expansion card with the screw previously removed from the chas-
sis.
8. Repeat this process with each expansion card to be installed into the chassis.
Figure 5-23: Removing the PCI Card Slot Guard