User`s manual

SC747 Chassis Manual
5-15
Figure 5-16: Removing a Dummy Drive Carrier
6. Secure the hard drive to the tray using four screws.
7. Insert the hard drive into the chassis. To do this:
7a. Press the hard drive release button to extend the drive tray handle.
7b. Insert the hard drive into the chassis and close the handle to lock the hard
drive into place.
Figure 5-17: Installing a Hard Drive
Drive Carrier
4. Remove the screws holding the drive carrier to the dummy drive.
5. Place a hard drive in the drive carrier.
SAS/SATA
Hard Drive