Datasheet

7-12
SUPERWORKSTATION 7033A-T Manual
Floppy Disk Controller
This setting allows you to assign control of the floppy disk controller.
The options are Enabled (user defined), Disabled and Auto (BIOS
controlled).
Base I/O Address
Select the base I/O address for the parallel port. The options are
Primary and Secondary.


Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.
Frequency Ratio
This setting allows you to specify the value of the internal frequency
multiplier of the processor, which is used to determine the processor
speed. Options are x8, x12, x13, x14, x15, x16, x17, x18, x19, x20 and
x21.
Fast String Operations
This setting allows you to Enable or Disable fast string operations.
Compatible FPU Code
This setting allows you to Enable or Disable the compatible FPU code.
Split Lock Operations
This setting allows you to Enable or Disable split lock operations.