Datasheet

7-10
SUPERWORKSTATION 7033A-T Manual


I/O Device Configuration
Access the submenu to make changes to the following settings.
Serial Port A
This setting allows you to assign control of serial port A. The options
are Enabled (user defined), Disabled and Auto (BIOS controlled).
Base I/O Address
Select the base I/O address for serial port A. The options are 3F8,
2F8, 3E8 and 2E8.
Interrupt
Select the IRQ (interrupt request) for serial port A. Options are IRQ3
and IRQ4.
Serial Port B
This setting allows you to assign control of serial port B. The options
are Enabled (user defined), Disabled and Auto (BIOS controlled).
Legacy USB Support
This setting allows you to enable support for Legacy USB devices. The
settings are Enabled and Disabled.
Local Bus IDE Adapter
Use this setting to enable the integrated local bus IDE adapter. Options
are Disable, Primary, Secondary and Both.
USB Device 9, Function 7
This setting controls USB functionality. Options are Disabled and
Enabled.