Datasheet

Chapter 7: BIOS
7-7
ACPI Mode
Use the setting to determine if you want to employ ACPI (Advanced
Configuration and Power Interface) power management on your system.
Options are Yes and No.
ACPI Sleep Mode
Selects the sleep mode for ACPI. Options are S1 and S3.
Power Loss Control
This setting allows you to choose how the system will react when power
returns after an unexpected loss of power. Options are Stay On, Power
Off and Last State.
Watch Dog
This setting is for enabling the Watch Dog feature. The options are Enabled
and Disabled.
Multiprocessor Specification
This setting allows you to configure the multiprocessor specification
revision level. The options are 1.1 and 1.4.
NT4 Installation Workaround
This setting allows BIOS to provide a workaround for the absence of a
floppy drive during NT4 installation. Options are Enabled and Disabled.
Summary Screen
This setting allows you to Enable or Disable the summary screen.