Datasheet

Chapter 5: Advanced Motherboard Setup
5-11
X5DAL-TG2 Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear See Chapter 2
JP9 Power Fail Alarm En/Disable Open (Disabled)
JP37 Watch Dog Pins 1-2 (Reset)
JP38 Thermal Fan Control Closed (Full Speed)
JP39 System (Front Side) Bus Speed Pins 1-2 (Auto)
JPA1 SATA #1/#2 Enable/Disable Pins 1-2 (Enabled)
JPA2 SATA #3/#4 Enable/Disable Pins 1-2 (Enabled)
JPL1 GLAN Enable/Disable Pins 1-2 (Enabled)
JPUSB USB Wake-up Pins 1-2 (Disabled)
JPWAKE Keyboard Wake-up Pins 1-2 (Disabled)
Connector Description
ATX PWR CONN Primary ATX Power Connector
COM1/COM2 COM1/COM2 Serial Port Connector
CPU/CHS/OH FAN CPU/Chassis/Overheat Fan Headers
DIMM#1-DIMM#4 Memory (RAM) Slots
FPUSB0/1/2/3 Front Panel USB Headers
GLAN1/2 Gigabit Ethernet Ports
J2/J3 IDE1/2 Hard Disk Drive Connector
J7 Parallel (Printer) Port
J9 PS/2 Keyboard/Mouse Ports
J12 IR/CIR Header
J15 Processor Power Connector
J30 Power Conn. (for use with AGP Pro cards)
JD1 PWR LED/Speaker Header
JF2 Front Control Panel Connector
JL1 Chassis Intrusion Header
JOH1 Overheat LED
JP7 Floppy Disk Drive Connector
JP8 Third Power Supply Fail Header
JP35 Keylock Switch Connector
JP36 Power Supply Fail Alarm Reset Switch
JSLED Serial ATA Drive Activity
JWOR1 Wake-on-Ring Header
SATA#1-4 Serial ATA Cable Headers
USB0/1 Universal Serial Bus Ports
WOL1 Wake-on-LAN Header